PAPER EXIT
SM 6-153 B132/B200
Detailed
Descriptions
6.17.4 ENERGY SAVER MODES
When the machine is not being used, the energy saver function reduces power
consumption by decreasing the fusing temperature.
This machine has three types of energy saver mode as follows.
1) Panel-off mode (operation panel off, fusing lamps on)
2) Low power mode (fusing lamps go to a lower temperature)
3) Auto off mode (fusing lamps turn off)
Stand-by Mode
Auto Off Mode
(Sleep Mode, if printer/scanner
installed)
Key Operation
Energy Saver Key ON
-or-
Panel Off Timer (10 s to 999 s / Default: 60 s)
Panel-Off Mode
Low Power Mode
Energy Saver Timer
(1min. to 240 min. / Default: 15 min.)
Return Time Less Than 10s
Operation Panel Key Pushed
Platen Cover Open / Closed
Original Set in ADF, Paper Set in Bypass
Return Time Less Than 4 minutes
Off Mode
Off Stand-by Mode
Printer Data in After Printing
Operation Sw. Off
-or-
Auto Off Timer
(1 min. to 240 min. / Default: 90 min.)
Operation Sw. Off
-or-
Auto Off Timer
(1 min. to 240 min. / Default: 90 min.)
Operation Sw. Off
-or-
Auto Off Timer
(1 min. to 240 min. / Default: 90 min.)
Return Time Less Than 8 minutes
Operation Switch Pushed
Platen Cover Open / Closed
Original Set in ADF
B132D933.WMF
To Next Page
Loading...
