ARDF INPUT/OUTPUT CHECK
SM 5-201 B132/B200
Service Tables
5.7.2 ADF OUTPUT CHECK: SP6008
1. Open SP mode SP6008.
2. Select the SP number that corresponds to the component you wish to check.
(Refer to the table below.)
3. Press On then press Off to test the selected item. You cannot exit and close
this display until you click Off to switch off the output check currently executing.
6008 ADF Output Chk ADF Output Check
Turns on the ADF electrical components individually for testing. Select the
component to test, then touch the "ON" button. Besure to touch the "OFF" button
as soon as you hear the component turn on.
001 ADF Feed M:Fwd 007 ADF Bot Inv M:Fwd
002 ADF Feed M:Rev 008 ADF Bot Inv M:Rev
003 ADF Trans M:Fwd 009 ADF Pickup M:Fwd
004 ADF Ext M:Fwd 010 ADF BotPlt M:Rev
005 ADF Top Inv M:Fwd 011 ADF Top Inv SOL
006 ADF Top Inv M:Rev 012 ADF Bot Inv SOL
To Next Page
Loading...
