Ricoh B132 - 3000-Sheet Finisher B706; Punch B702; Sheet Booklet Finisher B700;B701

PM TABLES
SM 2-11 B132/B200
Preventive
Maintenance
2.3.2 2000/3000-SHEET BOOKLET FINISHER B700/B701
300K 2400K 3000K 4000K EM Note
FINISHER
Covers I,C Alcohol or water, dry cloth
Drive Rollers C Damp cloth, dry cloth
Idle Rollers C Damp cloth, dry cloth
Anti-Static Brush C Dry cloth
Sensors C Blower brush
Corner Stapler R Print an SMC report with
SP5990. Replace the unit if
the staple count is 500K.
Booklet Stapler R Print an SMC report with
SP5990. Replace the unit if
the staple count is 200K.
2.3.3 PUNCH B702
PUNCH
300K 2400K 3000K 4000K EM
Punch Waste Hopper
I I I I I
Remove and empty
Punch Unit Replace after 1000k
punches.
2.3.4 3000-SHEET FINISHER B706
350K 700K 1050K Note
FINISHER
Driver rollers I I I
Idle rollers I I I
Discharge brush I I I
Alcohol
Shaft Bearings I I I Lubricate with silicone oil if noisy.
Sensors I I I Blower brush.
Jogger fences I I I Make sure that the screws are tight.
Staple waste hopper C C C Empty staple waste.
PUNCH B531/A821 EM 300K 450K 600K Note
Punch Waste Hopper I I I Remove and empty