PAPER EXIT
B132/B200 6-154 SM
These modes are controlled by the following user tools.
• Panel off timer: User Tools – System Settings – Timer Settings – Panel Off
Timer (default 60 seconds). Maximum recovery time: 10 seconds
• Low power mode timer: User Tools – System Settings – Timer Settings –
Energy Saver Timer (default 15 minutes). Maximum recovery time: 4
minutes
• Auto off timer: User Tools – System Settings – Timer Settings – Auto Off
Timer (default 90 minutes). Maximum recovery time: 8 minutes
• If the printer and scanner are installed, the machine uses ‘Sleep Mode’
instead of Auto Off mode. This is the same as Auto Off Mode, but if a print
job comes in, the printer wakes up to print the data. But if you wish to make
copies, first press the operation switch.
To Next Page
Loading...
