IMAGE TRANSFER UNIT
B132/B200 3-80 SM
Important
• Be sure to apply powder until the ITB is
completely covered.
• After covering the surface of the ITB
with lubricant power, be sure to rotate
the ITB through one full rotation in the
opposite direction. This allows the
cleaning blade edge [F] to be covered
with sufficient lubricant powder.
• Turn the transfer belt release lever back
down before sliding the unit into the
machine.
Reinstallation
• Do the forced MUSIC adjustment with SP 2111 001 (! 3.19.4).
B132R319.WMF
B132R320.WMF
[F]
To Next Page
Loading...
