PROGRAM DOWNLOAD
B132/B200 4-4 SM
Display Details Recovery
Download result failure 3 42
Download Error E42
Module ID
Card No. xx/xx
Operation panel or language download
failed. For this error, sometimes the
message may not be displayed.
• Cycle the machine
OFF/ON and re-try.
Download result failure 4 43
Download Error E43
Module ID
Card No. xx/xx
Print download failed.
• Cycle the machine
OFF/ON and re-try.
Download result failure 5 44 Download Error E44
Module ID Card No.
The data targeted for the write
operation could not be accessed.
• Turn the machine
power OFF. Then,
install a new System
SD card into Slot #1.
(P/N- SD-Card: Copy
- B1325730)
Download invalid 50 No Valid Data E50
The source data for the update could
not be authenticated.
• Use the correct SD
card.
Remote ROM update failure 1 51 (no display)
The source data for the ROM update is
corrupted because the machine is
operating and an SC code has been
issued.
• Turn the machine
power OFF/ON and
try again.
Remote ROM update failure 2 52 (no display)
The source data received for the ROM
update is corrupted; it failed a SUM
check due to its abnormal length.
• Try again with the
correct data.
Download result failure 6 53 (no display)
The previous download in progress
was cancelled.
• Do the download
procedure again.
⇒
Rev. 10/2005
To Next Page
Loading...
