SERVICE PROGRAM TABLES
SM 5-33 B132/B200
Service Tables
Group 2000
2101 Reg Col Interval Color Interval Registration Adjustment
Use these SPs to correct problems with color registration. Color registration
problems can be detected by checking the results of 2901 002 Pattern 1. Before
doing these adjustments, try to solve the problem by doing SP2111. For more, see
Section "4. Troubleshooting".
001 Main Scan Dot:K [-99~+99/1 dot]
002 Main Scan Dot:M
003 Main Scan Dot:C
004 Main Scan Dot:Y
005 MainScan Dot:K [-31~+31/1 sub dot]
006 MainScan Dot:K-M
007 MainScan Dot:K-C
008 MainScan Dot:K-Y
009 MainScan Dot:K 0-1 [-63~+63/1 line]
010 MainScan Dot:M 0-1
011 MainScan Dot:C 0-1
012 MainScan Dot:Y 0-1
013 SubScan Line:K-M [-63~+63/1 sub dot]
014 SubScan Line:K-C
015 SubScan Line:K-Y
016 SubScan M Adj:K-M [-33~+33/ 1 step]
017 SubScan M Adj:K-C
018 SubScan M Adj:K-Y
2102 Prt Mag Adj Print Magnification Adjustment
No information is available at this time.
001 Main Scan Mag [-100~+100/0.01%]
005 Mag Rate:K 0-1
006 Mag Rate:M 0-1
007 Mag Rate:C 0-1
008 Mag Rate:Y 0-1
[-63~+63/1 sub dot]
2103 Prt Erase Margin Print Erase Width Adjustment
Adjusts the white space at the leading edge.
001 Adj LEdge Margin [-50~+50/0.1 mm]
002 Adj TEdge Margin [-20+20/1 mm]
003 Adj Left Margin
004 Adj Right Margin
005 TEdge Margin:Tra [0~20/0.1 mm]
2104 Skew Adj Skew Adjustment
Use these SP to correct skew in color registration. For more, see Section "4.
Troubleshooting".
001 Skew Adj K-M [-75~+75/1 pulse]
002 Skew Adj K-C [-50~+50/1 pulse]
003 Test Pattern K-Y [-75~+75/1 pulse]
To Next Page
Loading...
