Ricoh B132 - Page 528

SERVICE PROGRAM TABLES
B132/B200 5-50 SM
2394 Ptype FC:MH Paper Type FC:MH
This SP sets image transfer bias for MH
(Medium High) speed during full-color
copying in areas where each color is used to develop the image.
2395 Ptype FC:HH Paper Type FC:HH
This SP sets image transfer bias for HH
(Highest) speed during full-color copying in
areas where each color
is used to develop the image.
012 Full Spd:ITB:K
2394 2395
013 Full Spd:ITB:M [10~250/1%] [10~250/1%]
014 Full Spd:ITB:C
015 Full Spd:ITB:Y
022 Half Spd:ITB:K
023 Half Spd:ITB:K
024 Half Spd:ITB:C
025 Half Spd:ITB:Y
2401 Norm K Bias
Sets the standard value of bias voltages at image transfer, and paper separation in
areas where black is used on plain paper during black-and-white printing.
001 ITB
[0~500/0.1 µA]
007 Side1:PTR
[-100~0/0.1 µA]
008 Side1:SepDC
[0~100/0.1 µA]
009 Side1:SepAC [80~120/0.1 kV]
012 Side2:PTR
[-100~0/1 µA]
013 Side2:SepDC
[0~100/0.1 µA]
014 Side2:SepAC [80~120/0.1 kV]
2406 Norm FC Bias Set Bias for Plain Paper: FC
Sets the standard value of bias voltages at image transfer, and paper separation in
areas the four colors are used on plain paper during full color printing.
001 ITB:K
[0~500/0.1 µA]
002 ITB:M
[0~500/0.1 µA]
003 ITB:C
[0~500/0.1 µA]
004 ITM:Y
[0~500/0.1 µA]
013 Side1:PTR
[-100~0/1 µA]
014 Side1:SepDC
[0~100/0.1 µA]
015 Side1:SepAC
[80~120/0.1 µA]
021 Side1:PTR
[-100~0/1 µA]
022 Side1:SepDC
[0~100/0.1 µA]
023 Side1:SepAC
[80~120/1 µA]