SERVICE PROGRAM TABLES
SM 5-65 B132/B200
Service Tables
These SPs (SP2761~SP2765) set the paper size correction coefficients for Special
Paper 1 relative to the settings done with SP2308 (Set Psize Thresh). All of hese
settings:
• Apply to printing on Special Paper 1 in the black-and-white mode
• Apply only to the image area
The title of each SP tells you the side and size where the setting is applied at ITB-
to-paper transfer, for example: "Side1:Size1:PTR" means the setting applies to
only the first side of Size 1 when the image is transferred from belt to paper.
2761 Size Coeff:Sp1 Size Correction Coefficient for Special Paper 1
007 Side1:Size1:PTR
012 Side2:Size1:PTR
SP2308 001 Threshold 1
[100~600/5%]
2762 Size Coeff:Sp1 Size Correction Coefficient for Special Paper 1
007 Side1:Size2:PTR
012 Side2:Size2:PTR
SP2308 002 Threshold 2, < SP2308 001 Threshold 1
[100~600/5%]
2763 Size Coeff:Sp1 Size Correction Coefficient for Special Paper 1
007 Side1:Size3:PTR
012 Side2:Size3:PTR
SP2308 003 Threshold 3, < SP2308 002 Threshold 2
[100~600/5%]
2764 Size Coeff:Sp1 Size Correction Coefficient for Special Paper 1
007 Side1:Size4:PTR
012 Side2:Size4:PTR
SP2308 004 Threshold 4, < SP2308 003 Threshold 3
[100~600/5%]
2765 Size Coeff:Sp1 Size Correction Coefficient for Special Paper 1
007 Side1:Size5:PTR
012 Side2:Size5:PTR
Up to SP2308 004 Threshold 4
[100~600/5%]
2771 LEdge Cor:Sp1:K Leading Edge Correction for Special Paper 1: K
Sets the leading edge correction coefficient when bias is applied as far as allowed
by the seting of SP2772 for drum to image transfer of the image during black and
white copying on Special Paper 1.
001 ITB [0~400/5%]
007 Side1:PTR
008 Side1:SepDC
009 Side1:SepAC
012 Side2:PTR
013 Side2:SepDC
014 Side2:SepAC
2772 LEdge SWT:Sp1:K Leading Edge Switch Timing for Special Paper 1: K
Sets the switch off timing of SP2771 . The selected value is the number of mm from
the leading edge. Applies only to printing in black-and-white mode on Special Paper
1.
001 ITB [0~30/1 mm]
002 PTR
003 SepDC
004 SepAC
To Next Page
Loading...
