SERVICE PROGRAM TABLES
SM 5-75 B132/B200
Service Tables
2871 LEdge Cor:Sp3:K Leading Edge Correction for Special Paper 3: K
Sets the leading edge correction coefficient when bias is applied as far as allowed
by the seting of SP2872 for drum to image transfer of the image during black and
white copying on Special Paper 3.
001 ITB [0~400/5%]
007 Side1:PTR
008 Side1:SepDC
009 Side1:SepAC
012 Side2:PTR
013 Side2:SepDC
014 Side2:SepAC
2872 LEdge SWT:Sp3:K Leading Edge Switch Timing for Special Paper 3: K
Sets the switch off timing of SP2871 . The selected value is the number of mm from
the leading edge. Applies only to printing in black-and-white mode on Special Paper
3.
001 ITB [0~30/1 mm]
002 PTR
003 SepDC
004 SepAC
2873 TEdge Cor:Sp3 K – PTR Trailing Edge Correction for Special Paper 3: K
Sets the bias applied at the trailing edge when the image is transferred from ITB to
paper by setting the start timing for SP2874 002 at the trailing edge. Applied to the
trailing edge for black-and-white mode on Special Paper 3 only.
007 Side1:PTR
012 Side2:PTR
[0~400/5%]
2874
TEdge SWT:Sp3 K –
PTR
Trailing Edge Switch Timing for Special Paper 3: K
Sets the switch timing that determines the distance from the leading edge where
the settings of SP2873 are applied during image transfer from ITB to paper. Applied
only when in black-and-white mode on Special Paper 3.
[-100~0/1 mm]
To Next Page
Loading...
