SERVICE PROGRAM TABLES
B132/B200 5-114 SM
5803 Input Chk Input Check (Mainframe) (!5.6.1)
5804 Output Chk Output Check (!5.6.2)
5810 Cancel Fusing SC Cancel Fusing SC Code
When the machine issues one of the "Level A" SC codes shown below, this
indicates a serious problem in the fusing unit. The machine is disabled and the
operator cannot reset the SC. The machine requires servicing immediately. Use this
SP code to release the machine for servicing.
• SC542 – SC545 Heating roller thermistor 1
• SC547 – Zero Cross
• SC548 – SC550 Heating roller thermistor 2
• SC551 – Pressure roller thermistor
• SC553 – SC555 Pressure roller thermistor
• SC662 – SC565 Hot roller thermistor
5811 Machine No. Setting Displays the machine serial number.
5812 Service Tel. No. Setting
001 Service
Inputs the telephone number of the CE (displayed when a
service call condition occurs.)
002 Facsimile
Use this to input the fax number of the CE printed on the
Counter Report (UP mode). Not Used
003 Supply Displayed on the initial SP screen.
004 Operation
Allows the service center contact telephone number to be
displayed on the initial screen.
To Next Page
Loading...
