Ricoh B132 - Page 663

SERVICE PROGRAM TABLES
SM 5-185 B132/B200
Service Tables
AddBook Register
8 951
These SPs count the number of events when the machine manages data
registration.
8 951 1 User Code User code registrations.
8 951 2 Mail Address Mail address registrations.
8 951 3 Fax Destination Fax destination registrations.
8 951 4 Group
Group destination
registrations.
8 951 5 Transfer Request
Fax relay destination
registrations for relay TX.
8 951 6 F-Code F-Code box registrations.
[0~9999999/ 1]
8 951 7 Copy Program
Copy application registrations
with the Program (job
settings) feature.
8 951 8 Fax Program
Fax application registrations
with the Program (job
settings) feature.
8 951 9 Printer Program
Printer application
registrations with the
Program (job settings)
feature.
8 951 10
Scanner
Program
Scanner application
registrations with the
Program (job settings)
feature.
[0~255 / 255]
System Stop Ctrl Setting
9 405
Setting of the system stop control function.
001 System Stop
Control ON/OFF
Switches the System Stop Control Function ON or OFF.
When this switch is ON:
The machine stops the job when the output of the
temperature/humidity sensor on the K-PCU is 41
°C
(105.8
°F) or higher.
NOTE: This keeps the temperature of the toner in the
development unit below 50
°C (122°F).
[0 - 1/ 1] 0: OFF, 1: ON (default)
002 System Stop
History
Displays whether or not System Stop Control has ever
stopped the machine in the middle of the job.
0 (default): System Stop Control has never stopped the
machine.
1: System Stop Control has stopped the machine one or
more times.
⇒
Rev. 10/2005