PAPER FEED
B132/B200 6-112 SM
Paper Size Switch Output
Paper Size Switch
12" x 18" SEF 12" x 18" 11111
A3 SEF 297 x 420 mm 11001
B4 SEF 257 x 394 mm 10011
A4 SEF 210 x 297 mm 01001
A4 LEF 210 x 297 mm 11000
B5 SEF 182 x 257 mm 10101
B5 LEF 182 x 257 mm 00011
A5 SEF 148 x 210 mm 11101
A5 LEF 148 x 210 mm 01101
DLT 11" x 17" 11100
LG SEF 8½" x 14" 10110
LT SEF 8½" x 11" 11010
LT LEF 8½" x 11" 01100
HLT SEF 5½" x 8½ " 01110
HLT LEF 5½" x 8½ " 11110
F4 8½" x 13" 11011
Folio 8¼" x 13" 01011
F 8" x 13" 01111
Executive LEF 7¼" x 10 ½" 10100
Executive SEF 7¼" x 10 ½" 00111
8-Kai 267 x 390 mm 00110
16-Kai LEF 267 x 195 mm 10010
16-Kai SEF 195 x 267 mm 10111
0: OFF (Sensor Output HIGH)
1: ON (Sensor Output LOW)
If the user does not put the fences at the correct position, a jam can occur.
To use a paper size that is not in this table, select the size with this user tool:
System Settings> Tray Paper Size. If the paper size is not the same as the setting,
a jam can occur. Note that SP 5112 must be set to ‘enabled’ or non-standard sizes
cannot be selected for trays 2 and 3.
To Next Page
Loading...
