A3/11" X 17" PAPER SIZE TRAY (B331)
SM 1-45 B132/B200
Installation
9. Put the short connector [A] into the socket in the machine [B].
NOTE: Hold the connector as shown in the illustration.
10. Install the A3/DLT tray [C] on the right rail [D], center rail [E], and left rail [F].
Use the screws that you removed in Steps 6 and 8.
NOTE: You must use the short, silver screws on the left and right rails. If you
use one of the longer screws, it will stop the movement of the tray on
the rails.
B331I004.WMF
B331I003.WMF
[C]
[D]
[E] [F]
[A]
[B]
To Next Page
Loading...
