FOLD ADJUSTMENTS (B700 ONLY)
B700/B701 14 SM
10. Push the stapler unit into the finisher and close the front door.
11. Do a folding test.
• Switch the copier on.
• Put one page of A3 or DLT paper in the ARDF.
• On the copier operation panel, select booklet stapling.
• Press [Start]. One sheet is folded.
12. Remove the sheet from the lower tray.
13. Hold the folded sheet with the creased side pointing down and face-up (the
same way that it came out of the finisher).
14. Referring to the diagram, determine if the skew is + [A] or – [B].
B700R901.WMF
[A]
[B]
To Next Page
Loading...
