Tray Heater (Optional Paper Feed Unit)
D129/D130 2-72 SM
4. Connect the harness [4] to the connector [5] of the tray heater.
5. Route the harness [4] as shown and clamp it with four clamps (
x 4).
6. Connect the harness [4] to the connector [6] of the mainframe.
7. Remove the connector cover [7] (
x 1).
8. Release the optional heater relay connector [8] (
x 1).
9. Connect the optional heater relay connector to the connector [9] (rear side) of the main
frame (
x 1).
To Next Page
Loading...
