Ricoh D129 - Stamp Solenoid

Electrical Components
B802/D630 14 SM
1.3.10 STAMP SOLENOID
1. Open the left cover.
2. Remove the platen plate [A].
3. Stamp solenoid cover [B] (
 x 1)
4. Remove the screw [C] (
 x 1).
 You cannot remove the stamp solenoid at this time.
5. Rear cover (
 "Front and Rear Cover")
6. Disconnect the stamp solenoid harness [D].
7. ADF feed motor ( "ADF Feed Motor")