Side Tray (D635)
D129/D130 2-58 SM
2.14.2 INSTALLATION PROCEDURE
Turn off the main switch of the copier and unplug the power cord before you start the
installation procedure.
If you will install the 1-bin tray (D632) on the machine, install the 1-bin tray first before
installing the side tray (D635). This makes it easier to do the following procedure.
1. Remove all tapes.
2. If the sensor feeler [A] is out, fold it into the machine.
3. Open the right door of the machine.
4. Remove the inner tray [A].
5. Remove the front right cover [B] (
x 1).
6. Remove the connector cover [C] (
x 1).
To Next Page
Loading...
