HDD Installation (D640-11)
D129/D130 2-78 SM
4. Connect the two harnesses from the HDD unit to the connecting board [A] (
x 2).
5. Install the HDD unit [A] on the controller board unit (
x 3).
6. Reinstall the controller board unit in the machine.
After Installing the HDD
1. Do SP5832-001 to format the hard disk.
2. Do SP5853-001 to copy the preset stamp data from the firmware to the hard disk.
3. Do SP5846-040 to copy the address book to the hard disk from the controller board.
4. Do SP5846-041 to let the user get access to the address book.
5. Turn the main power switch off/on.
To Next Page
Loading...
