Tables
5.4 MAIN SP TABLES-2
5.4.1 SP2-XXX: DRUM
2005* Bias Control
001
Bias Correction 1 [0.1 to 1 / 0.85 / 0.05 step]
Adjusts the lower threshold value for the charge roller correction.
When the value of VSDP/VSG is greater than this value, the charge roller
voltage increases by 30 V (e.g., from –500 to –530).
002
Bias Correction 2 [0.1 to 1 / 0.9 / 0.05 step]
Adjusts the upper threshold value for the charge roller correction.
When the value of VSDP/VSG is greater than this value, the charge roller
voltage decreases by 30 V (absolute value).
003
Bias Adjustment 1 [1000 to 2000 / 1500 / 10 vol]
Adjusts the lower limit value for charge roller voltage correction.
004
Bias Adjustment 2 [1000 to 2000 / 2000 / 10 vol]
Adjusts the upper limit value for charge roller voltage correction.
005
Bias Adjustment 3 [0 to 100 / 30 / 10 vol]
Adjusts the correction voltage adjustment step size.
2103*
Erase Margin Adjustment
Adjusts the erase margin by deleting image data at the margins.
L Size: 297.1 mm or more (length)
M Size: 216.1 to 297 mm (length)
S Size: 216 mm or less (length)
001 Leading Edge
[0 to 9 / 3 / 0.1mm]
002 Trailing Edge
003 Left [0 to 9 / 2 / 0.1mm]
To Next Page
Loading...
