Ricoh D129 - Iob; Psu; When Installing a New IOB

Electrical Components
SM 4-105 D129/D130
Replacement
and
Adjustment
4.15.8 IOB
1. Rear cover ( p.4-4)
2. IOB [A] (
x 6, x all)
When installing a new IOB
Set the bit switches on the new IOB to the same settings as the old IOB.
4.15.9 PSU
1. Left cover ( p.4-4)
2. PSU [A] (
x 4, x all)
3. Two clamps [B] (These clamps will be used for the new PSU.)