Punch Unit Installation (D570)
D129/D130 2-46 SM
2.11 PUNCH UNIT INSTALLATION (D570)
The Punch Unit D570 can be installed in the 3000/2000-Sheet (Booklet) Finisher D636/D637.
2.11.1 COMPONENT CHECK
Check the quantity and condition of the components against the following list.
No. Description Q'ty
1 Punch-out Waste Unit 1
2 Slide Drive Unit 1
3 Punch Waste Hopper 1
4 Wire harness: short-circuit 1
5 Screws (M3 x 6) 5
6 Side-to-Side Detection Unit 1
7 Punching Unit 1
To Next Page
Loading...
