Ricoh D129 - Main Sp Tables-4; Sp4-XXX: Scanner

Main SP Tables-4
SM 5-19 D129/D130
Service
Tables
5.6 MAIN SP TABLES-4
5.6.1 SP4-XXX: SCANNER
4008*
Sub Scan Mag. Adjustment
Adjusts the magnification of the sub scan direction during scanning.
Changing this value changes the scanner motor speed.
[–1 to 1 / 0 / 0.1% ]
4010*
L-Edge Regist Adjustment
Adjusts the leading edge registration for scanning.
[–2 to 2 / 0 / 0.1 mm ]
As you enter a negative value, the image moves toward the leading edge.
4012*
Scanner Erase Margin: Scale
Adjusts scanning margins for the leading and trailing edges (sub scan) and
right and left edge (main scan).
 Do not adjust unless the customer desires a scanner margin
greater than the printer margin.
 These settings are adjusted to erase shadows caused by the gap
between the original and the scale of the scanner unit.
001 Book: Leading Edge [0 to 3 / 1 / 0.1 mm]
002 Book: Trailing Edge [0 to 3 / 0 / 0.1 mm]
003 Book: Left [0 to 3 / 1 / 0.1 mm]
004 Book: Right [0 to 3 / 0 / 0.1 mm]
005 ADF: Leading Edge [0 to 3 / 0 / 0.1 mm]
007 ADF: Right [0 to 3 / 0 / 0.1 mm]
008 ADF: Left [0 to 3 / 0 / 0.1 mm]