and
Adjustment
3. HDD unit [A] (
x 2, x 2)
After installing the new HDD unit
1. Do SP5832-001 to format the hard disk.
2. Do SP5853-001 to copy the preset stamp data from the firmware to the hard disk.
3. Do SP5846-052 to copy back the address book to the hard disk from the SD card to which
you have already copied the address book data if possible.
4. Turn the main power switch off/on.
Disposal of HDD Units
Never remove an HDD unit from the work site without the consent of the client.
If the customer has any concerns about the security of any information on the HDD, the
HDD must remain with the customer for disposal or safe keeping.
The HDD may contain proprietary or classified (Confidential, Secret) information.
Specifically, the HDD contains document server documents and data stored in temporary
files created automatically during copy job sorting and jam recovery. Such data is stored on
the HDD in a special format so it cannot normally be read but can be recovered with illegal
methods.
To Next Page
Loading...
