Ricoh D129 - Booklet Finisher Sr3020 (B803); Sr3110 (D637);Sr4020 (D373) Finisher Sr3030 (B805);

SM i B803/B805/D373/D374/D636/D637
BOOKLET FINISHER SR3020 (B803)/
SR3110 (D637)/SR4020 (D373)
FINISHER SR3030 (B805)/
SR3120 (D636)/SR4010 (D374)
TABLE OF CONTENTS
1. REPLACEMENT AND ADJUSTMENT ........................................... 1
1.1 COVERS ........................................................................................................ 1
1.1.1 EXTERIOR COVERS ........................................................................... 1
1.1.2 UPPER TRAY, END FENCE ................................................................ 2
1.2 MAIN UNIT ..................................................................................................... 3
1.2.1 UPPER TRAY LIMIT SENSOR, LIMIT SWITCH .................................. 3
1.2.2 POSITIONING ROLLER ....................................................................... 4
1.2.3 PROOF TRAY EXIT SENSOR ............................................................. 5
1.2.4 UPPER TRAY HEIGHT SENSORS 1, 2 ............................................... 5
1.2.5 EXIT GUIDE PLATE, UPPER TRAY EXIT SENSOR ........................... 6
1.2.6 PROOF TRAY FULL SENSOR ............................................................. 7
1.2.7 FINISHER ENTRANCE SENSOR ........................................................ 7
1.2.8 PRE-STACK TRAY EXIT SENSOR ...................................................... 8
1.3 STAPLER UNIT ............................................................................................. 9
1.3.1 CORNER STAPLER ............................................................................. 9
1.3.2 POSITIONING ROLLER ..................................................................... 10
1.4 FOLD UNIT .................................................................................................. 11
1.4.1 FOLD UNIT ......................................................................................... 11
1.4.2 FOLD UNIT ENTRANCE SENSOR .................................................... 13
1.4.3 FOLD UNIT EXIT SENSOR ................................................................ 14
1.4.4 STACK PRESENT SENSOR .............................................................. 15
1.4.5 FOLDING HORIZONTAL SKEW ADJUSTMENT (FOR B804 ONLY) 16
1.4.6 FOLD VERTICAL SKEW ADJUSTMENT (FOR B804 ONLY) ............ 19
1.5 BOOKLET STAPLER UNIT ......................................................................... 21
1.5.1 BOOKLET STAPLER .......................................................................... 21
1.5.2 BOOKLET STAPLER MOTOR ........................................................... 22
To Reattach the Booklet Stapler Motor .................................................. 23