Installing Controller Options
D641 16 SM
1.3.2 POSTSCRIPT 3 UNIT (D641)
Unplug the main machine power cord before you do the following procedure.
1. Remove the controller cover [A] (
x 2)
2. Turn the SD-card label face to the rear of the machine. Then push it slowly into Slot 1 (Upper
Slot) [A] until you hear a click.
3. Attach the controller cover (
x 2).
4. Attach the "Adobe PostScript 3" decal [A] to the front door.
5. Make sure that the machine can recognize the option. (
p.30 "Check All Connections")
To Next Page
Loading...
