Ricoh D129 - Developer

Development
D129/D130 4-46 SM
6. Rotate the development roller [A] in the direction of the arrow until the section you cleaned
is no longer visible.
7. Repeat steps 5 and 6 until you have cleaned the entire surface of the roller.
8. Reassemble the PCDU and install the PCDU into the machine.
4.7.3 DEVELOPER
1. PCDU ( p.4-37)
2. Open the PCDU. (
p.4-38 "Drum")
3. Development roller (
p.4-44)
4. Joint bracket [A] (
x 2, x 1)
5. Development unit [B]