& Finishers
(B803/B805/
D373/D374/
D636/D637)
1.4.4 STACK PRESENT SENSOR
If you intend to correct the horizontal and vertical skew for the fold unit at the same time,
do those adjustments first, then replace the sensor. ( "Folding Horizontal Skew
Adjustment" or "Fold Vertical Skew Adjustment")
1. Remove the stapler unit ( "Fold Unit")
2. Guide plate [A].
3. Stay [B] ( x4)
4. Left plate [C] ( x4)
5. Sensor bracket [D] ( x1)
6. Stack present sensor [E] (S32) ( x1)
To Next Page
Loading...
