Ricoh D129 - SC Tables: Sc7 Xx

Service Call Conditions
D129/D130 6-30 SM
SC Tables: SC7xx
700 D Scanner feeding error 1
01 -
Pick-up roller HP error
When the pick-up motor turns on counterclockwise, the pick-up roller HP
sensor does not detect the home position of the pick-up roller.
 Defective pick-up roller HP sensor
 Defective pick-up motor
 Defective DF drive board
02 -
Original stopper HP error
When the pick-up motor turns on clockwise, the original stopper HP sensor
does not detect the home position of the original stopper.
 Defective original stopper HP sensor
 Defective pick-up motor
 Defective DF drive board
12 -
DF fan motor 1 error
DF fan motor lock signal is detected after the original transportation has
finished.
 Turn the main switch off and on.
701 D Scanner feeding error 2
02 -
Pick-up motor driver error
The error flag of the pick-up motor driver IC is asserted when the jam error is
issued.
Pick-up motor driver detected an error.
Turn the main switch off and on.