9. Turn the SD card label face to the rear of the machine. Then push it slowly into Slot 2
(Lower Slot) until you hear a click.
10. Turn on the main power switch.
11. Press the "User Tools" key on the operation panel.
12. Touch the "Extended Feature Settings" button twice.
13. Touch the "Extended Feature Info" tab on LCD.
14. Touch the "App2Me" line.
15. Set the setting of the "Auto Start" to "On".
16. Touch the "Exit" button.
17. Exit the "User Tools/Counter" settings.
2.3.3 MOVING THE MACHINE
This section shows you how to manually move the machine from one floor to another floor. See
the section "Transporting the Machine" if you have to pack the machine and move it a longer
distance.
1. Remove all trays from the optional paper feed unit or LCT.
2.3.4 TRANSPORTING THE MACHINE
1. Do SP 4806-001 to move the scanner carriage from the home position. This prevents dust
from falling into the machine during transportation.
2. Make sure there is no paper left in the paper trays. Then fix down the bottom plates with a
sheet of paper and tape.
3. Do one of the following:
Attach shipping tape to the covers and doors.
Shrink-wrap the machine tightly.
To Next Page
Loading...
