Fax Option Installation
D629 2 SM
1.1.2 FAX OPTION INSTALLATION PROCEDURE
Before installation:
If there is a printer option in the machine, print out all data in the printer buffer.
Push the operation switch to put the machine in standby mode. Make sure the power
LED is off, turn the main switch off, and then disconnect the power cord and the network
cable.
The copier must be connected to a properly grounded socket outlet.
1. Attach the serial number decal near the serial number plate of the mainframe.
2. For NA models, attach the FCC decal near the serial number plate of the mainframe.
3. Remove the controller cover [A] (
x 2).
To Next Page
Loading...
