BU3030/
BU3060
(D386/D634)
2.5 JUNCTION GATE MECHANISM
The junction gate [A] directs any paper reaching the bridge unit to either the upper tray (on top of
the bridge unit) or to the finisher, depending on which has been selected.
If the junction gate solenoid has been activated, the junction gate [A] points downward and directs
the paper to the upper tray [B] (dotted line path in illustration). When the solenoid is off, the
junction gate points upward and the paper is fed out to the finisher [C] by the transport and left exit
rollers (solid line).
To Next Page
Loading...
