Paper Feed
D129/D130 4-60 SM
This makes the paper guide [D] tilt a little bit. Now you can access the screw [E].
9. Dust container rail [F] (
[E] x 1)
10. Sensor bracket [G] (
x 1)
You can only access the screw on the sensor bracket from the inside (paper tray
location) of the machine.
11. Registration sensor [H] (
x 1, hooks)
Reinstall the registration sensor
It is very difficult to secure the sensor bracket to the frame. First attach the sensor bracket with
tape temporarily.
To Next Page
Loading...
