Ricoh D129 - Page 107

Tray Heater (Optional Paper Feed Unit)
SM 2-75 D129/D130
Installation
9. Connect the harness [7] to the connector [9] of the mainframe.
10. Reassemble the rear cover of the optional LCT.
11. Remove the connector cover [10] (
x 1).
12. Release the optional heater relay connector [11] (
x 1).
13. Connect the optional heater relay connector to the connector [12] (rear side) of the main
frame (
x 1).
14. Reassemble the mainframe and optional LCT.