Ricoh D129 - Page 1073

Service Program Tables
SM 55 D629
Fax Option
Type 5002
(D629)
107
G3-3 Switch
001 – 016 00 – 0F
Change the bit switches for the protocol settings of
the optional G3 board
"G3-2 and G3-3 Switches" in "Bit Switches - 5"
108
G4 Internal Switch
001 – 032 00 – 1F
Not used (Do not change the bit switches)
109
G4 Parameter Switch
001 – 016 00 – 0F
Not used (Do not change the bit switches)
111
IP fax Switch
001 – 016 00 – 0F
Change the bit switches for optional IP fax
parameters
"IP Fax Switches" in "Bit Switches - 6"
4.2.2 SP2-XXX (RAM DATA)
2
Mode No. Function
101
RAM Read/Write
001
Change RAM data for the fax board directly.
p.164 "Service RAM Addresses"
102
Memory Dump
001
G3-1 Memory
Dump
Print out RAM data for the fax board.
p.164 "Service RAM Addresses"
002
G3-2 Memory
Dump
Print out RAM data for the optional SG3
board.
003
G3-3 Memory
Dump
Print out RAM data for the optional SG3
board.
004 G4 Memory Dump Not used
103 G3-1 NCU Parameters