Ricoh D129 - Page 1096

Bit Switches - 1
D629 78 SM
4-5
Interval for preventing the
machine from entering Energy
Saver mode if there is a pending
transmission file.
If there is a file waiting for transmission, the
machine does not go to Energy Saver mode
during the selected period.
After transmitting the file, if there is no file
waiting for transmission, the machine goes to
the Energy Saver mode.
Bit 5 Bit 4 Setting
0 0 1 min
0 1 30 min
1 0 1 hour
1 1 24 hours
6-7 Not used Do not change
System Switch 16 (SP No. 1-101-023)
No Function Comments
0
Parallel Broadcasting
0: Disabled
1: Enabled
1: The machine sends messages
simultaneously using all available ports during
broadcasting.
NOTE: If a customer wants to keep a line
available for fax reception or other reasons,
select "0" (Disable).
1
Priority setting for the G3 line.
0: PSTN-1 > PSTN-2 or 3
1: PSTN-2 or 3 > PSTN-1
This function allows the user to select the
default G3 line type. The optional SG3 units are
required to use the PSTN-2 or 3 setting.
2-7 Not used Do not change these settings.
System Switch 17 - Not used (do not change these settings)
System Switch 18 - Not used (do not change these settings)