Browser Unit Type I
D129/D130 2-88 SM
2. Insert the SD card included for firmware update into the lower slot [A].
3. Turn the main switch ON.
4. After the Update screen is displayed, select the “Browser”.
5. Touch “Update (#)”.
6. After the "Update Done" message appears on the screen, turn the main power switch OFF.
7. Remove the SD card from the lower slot.
Do the following steps if you are updating the Extended JavaScript.
8. Turn the main switch ON.
9. Press the “User Tools/Counter” key.
10. On the touch panel, touch “Extended Feature settings”.
11. Touch “Extended Feature settings” in the Extended Feature Settings Menu.
12. Change the status of “Extended JS” to “Ending” in the Startup Settings tab.
13. Turn the main switch OFF.
14. Insert the SD card containing the Extended JS firmware into the lower slot.
15. Turn the main switch ON.
16. Press the “User Tools/Counter” key.
Rev. 04/20/2012
To Next Page
Loading...
