Browser Unit Type I
D129/D130 2-90 SM
23. After “The following extended feature has already been installed. Are you sure you want to
overwrite it?” is displayed, press “Yes”.
24. Change the status of Extended JS to “waiting” in the Startup Settings tab.
25. Turn the main switch OFF.
26. Remove the SD card from slot 2 (lower slot).
27. Turn the main switch ON.
28. Press the “User Tools/Counter” key.
29. On the touch panel, touch “Extended Feature settings”.
30. Touch “Extended Feature settings” in the Extended Feature settings Menu.
31. Make sure that the “Extended JS” has been updated to the latest version in the Startup
Settings tab.
2.22.4 EXJS FIRMWARE UN-INSTALL PROCEDURE
1. Turn the main switch ON.
2. Press the “User Tools/Counter” key.
3. Login with an administrator user name and password.
4. On the touch panel, touch “Extended Feature settings”.
5. Touch “Extended Feature settings” in the Extended Feature Settings Menu.
6. Touch “Extended Feature settings” in the Extended Feature Settings Menu.
Rev. 04/20/2012
To Next Page
Loading...
