Card Reader Bracket Type C3352 (D593)
SM 2-93 D129/D130
Installation
2.23.2 INSTALLATION PROCEDURE
1. Attach the tray bracket [A] to the scanner right cover (
[B] x 2: M3x 8
For this model, use the screw holes marked "1" on the table bracket.
2. Attach the lower tray [A] to the tray bracket (
x 2: M3x8).
3. Attach the upper tray [B] to the tray bracket (
x 1: M3x8).
4. Connect the cable to the designated connector (the connector to use depends on the type
of device to be connected).
Rev. 04/20/2012
To Next Page
Loading...
