Ricoh D129 - Page 1322

Tray Movement Mechanism
B803/B805/D373/D374/D636/D637 50 SM
Lower Tray Full Condition Table
A3 (DLT)
1 Sht 2 Sht 3 Sht 4 Sht 5 Sht 6 Sht 7 Sth 8 Sht 9 Sht …
Full 1
3 Cnt
— — — — — — — — …
Full 2 —
5 Cnt
15
Cnt
— — — — — — …
Full 3 — — —
7 Cnt
13
Cnt
4 Cnt 2 Cnt 2 Cnt 2 Cnt
…
A4 (LT)
1 Sht 2 Sht 3 Sht 4 Sht 5 Sht 6 Sht 7 Sth 8 Sht 9 Sht …
Full1
16
Cnt
— — — — — — — — …
Full 2 —
10
Cnt
10
Cnt
15
Cnt
20
Cnt
15
Cnt
10
Cnt
8 Cnt 8 Cnt
…
Full 3 — — — …
Examples:
After the copier makes a booklet with 1 sheet of A3/DLT paper, the machine checks every 100 ms
for the ‘Full 1’ condition. If the Full 1 condition occurs 3 times (shaded block in the table above),
the machine detects that the tray is full.
After the copier makes a booklet with 5 sheets of A4/LT paper, the machine checks every 100 ms
for the ‘Full 2’ condition. If the Full 2 condition occurs 20 times (shaded block in the table above),
the machine detects that the tray is full.