Safety and Symbols
Conventions Used in this Manual
This manual uses several symbols.
: See or Refer to
: Screws
: Connector
: Clip ring
: E-ring
: Clamp
Cautions, Notes, etc.
The following headings provide special information:
Failure to obey warning information could result in serious injury or death.
Obey these guidelines to ensure safe operation and prevent minor injuries.
Obey these guidelines to avoid problems such as misfeeds, damage to originals, loss of
valuable data and to prevent damage to the machine.
This information provides tips and advice about how to best service the machine.
To Next Page
Loading...
