Installing Controller Options
D641 24 SM
1.3.7 GIGABIT ETHERNET (G874)
Unplug the main machine power cord before you do the following procedure.
You can only install one of the following network interfaces at one time: (IEEE 802.11a/g, g
(Wireless LAN), IEEE1284, IEEE1394, Bluetooth).
1. Remove the slot cover [A] from the board slot (
x 2).
2. Insert the Gigabit Ethernet Board into the I/F slot and fasten it with the screws.
3. Print a configuration page to confirm that the machine recognizes the installed board for
USB2.0:
User Tools > Printer Features > List/Test Print > Configuration Page
To Next Page
Loading...
