Tables
2973*
Grayscale Cycle (SSP) [0 to 1000 / 100 / 10 sheets ]
Set s the halftone operation interval in order to prevent deterioration of the
OPC. If the number of copies exceeds this setting, at the end of the job, or if
the door is opened and closed, charge correction is executed.
2974* Image Density
001
Adjustment Mode [1 to 5 / 3 / 1 ]
Adjusts image density. Changing this setting adjusts development bias and
ID sensor output voltage that in turn raises or lowers image density.
2980*
Charge Counter [0 to 1000000 / 0 / 1 sheets ]
Set the number of pages to print after toner and carrier initialization before
the charge input is increased to compensate for deterioration over time in
the polarity of the carrier.
The strength in the polarity of the carrier in the toner will eventually
decrease and cause lower charge output. Setting the charge output to
increase after a specified number of copies can compensate for this effect.
To Next Page
Loading...
