Tables
209 Instl Clear
Releases the machine from its Embedded RCG
Gate setup.
NOTE: Turn off and on the main power switch after
this setting has been changed.
250 CommLog Print Prints the communication log.
5821* Remote Service Address
002 RCG IP Address
Sets the IP address of the RCG (Remote
Communication Gate) destination for call
processing at the remote service center.
[00000000h to FFFFFFFFh / 00000000h / 1]
003 RCG Port
Sets the port number of the RCG (Remote
Communication Gate) destination for call
processing at the remote service center.
[0 to 65535 / 443 / 1]
004 RCG URL Path
Sets the URL path of the RCG (Remote
Communication Gate) destination for call
processing at the remote service center.
[0 to 16 characters / /RCG/services/ /-]
5824
NV-RAM Data Upload
Uploads the NVRAM data to an SD card. Push Execute.
Note: When uploading data in this SP mode, the front door must be open.
5825
NV-RAM Data Download
Downloads data from an SD card to the NVRAM in the machine. After
downloading is completed, remove the card and turn the machine power off
and on.
To Next Page
Loading...
