Tables
100 Notify Unsupport
This SP determines whether an alert message appears on the control panel
when a USB device (unsupported device) that cannot use an A-connector is
connected.
[0 to 1 / 1 / 1]
0: Function enable
1: Function disable
An unsupported device is a device that cannot use the functions of the
USB device. For example, a USB mouse cannot be used even if it
connected.
If the PictBridge option is not mounted, even if a digital camera is
connected it cannot be used because it is an unsupported device.
5845*
Delivery Server Setting
These are delivery server settings.
001
FTP Port No.
[0 to 65535 / 3670 / 1]
002
IP Address (Primary)
Use this SP to set the Scan Router Server address. The IP address under
the transfer tab can be used with the initial system setting.
[Range: 000.000.000.000 to 255.255.255.255]
006
Delivery Error Display Time
Use this setting to set the length of time that the message is shown when a
test error occurs during document transfer with the NetFile application and
an external device.
[0 to 999 / 300 / 1 sec]
008
IP Address (Secondary)
Sets the IP address that is given to the computer that is the secondary
delivery server for Scan Router. This SP lets you set only the IP address,
and does not refer to the DNS setting.
[Range: 000.000.000.000 to 255.255.255.255]
To Next Page
Loading...
