Tables
022
SMTP Auth. From Field Replacement
Determines whether the FROM item of the mail header is switched to the
validated account after the SMTP server is validated.
[0 to 1 / 0 / 1]
0: No. "From" item not switched.
1: Yes. "From" item switched.
025
SMTP Auth Direct Sending
Select the authentication method for SMPT.
Bit 0: LOGIN
Bit 1: PLAIN
Bit 2: CRAM_MD5
Bit 3: DIGEST_MD5
Bit 4 to Bit 7: Not Used
This SP is activated only when SMTP authentication is enabled by
UP mode.
026
S/MIME: MIME Header Setting
Selects the MIME header type of an E-mail sent by S/MIME.
[0 to 2 / 0 / 1]
0: Microsoft Outlook Express standard
1: Internet Draft standard
2: RFC standard
028 S/MIME: Authentication Check
When sending S/MIME mail, specifies whether to check the destination
authentication.
[0 to 1 / 0 / 1]
0: Not checked
1: Checked
To Next Page
Loading...
