Tables
5888*
Personal Information Protect
Selects the protection level for logs.
[0 to 1 / 0 / 1]
0: No authentication, No protection for logs
1: No authentication, Protected logs (only an administrator can see the logs)
5893
SDK Application Counter
Displays the counter name of each SDK application.
1 SDK-1
2 SDK-2
3 SDK-3
4 SDK-4
5 SDK-5
6 SDK-6
5907
Plug & Play Maker/Model Name
Selects the brand name and the production name for Windows Plug & Play.
This information is stored in the NVRAM. If the NVRAM is defective, these
names should be registered again.
After selecting, press the "Original Type" key and "#" key at the same time.
When the setting is completed, the beeper sounds five times.
5913* Switchover Permission Time
002
Print Application Timer [3 to 30 / 3 / 1 second step]
Sets the length of time to elapse before allowing another application to take
control of the display when the application currently controlling the display is
not operating because a key has not been pressed.
To Next Page
Loading...
