Tables
8066
L:FIN Jobs [0 to 9999999 / 0 / 1]
These SPs total finishing methods for jobs output from within the
document server mode screen at the operation panel. The finishing
method is specified from the print window within document server mode.
8067
O:FIN Jobs [0 to 9999999 / 0 / 1]
These SPs total finishing methods for jobs executed by an external
application, over the network. The finishing method is specified by the
application.
806x 1 Sort
Number of jobs started in Sort mode. When a stored
copy job is set for Sort and then stored on the
document server, the L: counter increments. (See
SP8066 1)
806x 2 Stack Number of jobs started out of Sort mode.
806x 3 Staple Number of jobs started in Staple mode.
806x 4 Booklet
Number of jobs started in Booklet mode. If the
machine is in staple mode, the Staple counter also
increments.
806x 5 Z-Fold
Number of jobs started In any mode other than the
Booklet mode and set for folding (Z-fold).
806x 6 Punch
Number of jobs started in Punch mode. When Punch
is set for a print job, the P: counter increments. (See
SP8064 6.)
806x 7 Other Reserved. Not used
806x 8 Inside-Fold
Number of jobs started In any mode other than the
Booklet mode and set for folding (Inside-fold).
806x 9 Three-IN-Fold Letter Fold-in Not Used
806x 10 Three-OUT-Fold Letter Fold-out Not Used
806x 11 Four-Fold Double Parallel Fold Not Used
806x 12 KANNON-Fold Gate Fold Not Used
To Next Page
