Ricoh D129 - Page 402

Main SP Tables-8
SM 5-143 D129/D130
Service
Tables
807x 3 3 Pages 807x 10
101 to 300 Pages
807x 4 4 Pages 807x 11
301 to 500 Pages
807x 5 5 Pages 807x 12
501 to 700 Pages
807x 6 6 to 10 Pages 807x 13
701 to 1000 Pages
807x 7 11 to 20 Pages 807x 14
1001 to Pages
 For example: When a copy job stored on the document server is printed in document server
mode, the appropriate L: counter (SP8076 0xx) increments.
 Printing a fax report counts as a job and increments the F: counter (SP 8073).
 Interrupted jobs (paper jam, etc.) are counted, even though they do not finish.
 If a job is paused and re-started, it counts as one job.
 If the finisher runs out of staples during a print and staple job, then the job is counted at the
time the error occurs.
 For copy jobs (SP 8072) and scan jobs (SP 8075), the total is calculated by multiplying the
number of sets of copies by the number of pages scanned. (One duplex page counts as 2.)
 The first test print and subsequent test prints to adjust settings are added to the number of
pages of the copy job (SP 8072).
 When printing the first page of a job from within the document server screen, the page is
counted.
8111
T:FAX TX Jobs [0 to 9999999 / 0 / 1]
These SPs count the total number of jobs (color or black-and-white) sent
by fax, either directly or using a file stored on the document server, on a
telephone line.
Note: Color fax sending is not available at this time.
001 B/W Black TX
8113
F:FAX TX Jobs [0 to 9999999 / 0 / 1]
These SPs count the total number of jobs (color or black-and-white) sent
by fax directly on a telephone line.
Note: Color fax sending is not available at this time.
001 B/W Black TX