Ricoh D129 - Page 409

Main SP Tables-8
D129/D130 5-150 SM
8211 T:Scan PGS/LS
These SPs count the number of pages scanned into
the document server .
[0 to 9999999 / 0 / 1]
The L: counter counts the number of pages stored
from within the document server mode screen at the
operation panel, and with the Store File button from
within the Copy mode screen
8212 C:Scan PGS/LS
8213 F:Scan PGS/LS
8215 S:Scan PGS/LS
8216 L:Scan PGS/LS
 Reading user stamp data is not counted.
 If a job is cancelled, the pages output as far as the cancellation are counted.
 If the scanner application scans and stores 3 B5 sheets and 1 A4 sheet, the S: count is 4.
 If pages are copied but not stored on the document server, these counters do not change.
 If both sides of 3 A4 sheets are copied and stored to the document server, the C: count is 6
and the L: count is 6.
 If you enter document server mode then scan 6 pages, the L: count is 6.
8221
ADF Org Feeds [0 to 9999999 / 0 / 1]
These SPs count the number of pages fed through the ADF for front and
back side scanning.
001 Front
Number of front sides fed for scanning:
With an ADF that can scan both sides simultaneously, the Front
side count is the same as the number of pages fed for either
simplex or duplex scanning.
With an ADF that cannot scan both sides simultaneously, the
Front side count is the same as the number of pages fed for
duplex front side scanning. (The front side is determined by which
side the user loads face up.)
002 Back
Number of rear sides fed for scanning:
With an ADF that can scan both sides simultaneously, the Back
count is the same as the number of pages fed for duplex
scanning.
With an ADF that cannot scan both sides simultaneously, the
Back count is the same as the number of pages fed for duplex
rear-side scanning.